OpenScape 4000 - Access Point

1. Deactivate the shelf

   DEACTIVATE-USSU:LTG=1,LTU=17;
   

2. Remove the old board, insert the new one
   If the new board has the same part number as the old one, proceed directly to Item 6. “Activate the shelf”.
3. Delete the AP

   EXEC-USSU:ART=DELAP,LTU=17;
   

4. Assign the new part number to the shelf

   CHANGE-UCSU:UNIT=AP,LTG=1,LTU=17,LTPARTNO=Q2305-X10;
   

5. Configure the AP

   EXEC-USSU:MODE=CONFAP,LTU=17;
   

6. Activate the shelf

   ACTIVATE-USSU:UNIT=LTG,LTG=1,LTU=17;
   

OpenScape 4000 - Switch

CHANGE-STMIB:MTYPE=NCUI2,LTU=18,SLOT=99,TYPE=GLOBAL,PATTERN=213; 
CHANGE-STMIB:MTYP=NCUI2,LTU=18,TYPE=IFDATA,VLAN=NO,TOSLAN=72,TOSMO­
DEM=80,VLANID=0,BITRATE=100MBFD;
CHANGE-STMIB:MTYP=NCUI2,LTU=18,TYPE=SERVIF,LOGINTRM="TRM",LOGINPPP="PPP";
CHANGE-STMIB:MTYPE=NCUI2,LTU=18,TYPE=ASC,TOSPL=48=PRIO=PRIO1,CO­
DEC=G711,VAD=NO,RTP="30"; 
CHANGE-STMIB:MTYPE=NCUI2,LTU=18,TYPE=ASC,PRIO=PRIO2,CODEC=G729,VAD=NO,RTP="20"; 
CHANGE-STMIB:MTYPE=NCUI2,LTU=18,TYPE=ASC,PRIO=PRIO3,CODEC=NONE,VAD=NO,RTP="20";
CHANGE-STMIB:MTYPE=NCUI2,LTU=18,TYPE=ASC,PRIO=PRIO4,CODEC=NONE,VAD=NO,RTP="20";
CHANGE-STMIB:MTYPE=NCUI2,LTU=18,TYPE=ASC,PRIO=PRIO5,CODEC=NONE,VAD=NO,RTP="20";
CHANGE-STMIB:MTYPE=NCUI2,LTU=18,TYPE=ASC,PRIO=PRIO6,CODEC=NONE,VAD=NO,RTP="20";
CHANGE-STMIB:MTYPE=NCUI2,LTU=18,TYPE=ASC,PRIO=PRIO7,CODEC=NONE,VAD=NO,RTP="20";
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=JB,AVGDLY=40,MAXDLYV=120,MINDLYV=20,PACK­
LOSS=4,AVGDLYG=60,MAXDLYD=200,JBMODE=1;
CHA-STMIB:MTYPE=NCUI2,LTU=18,TYPE=SIGQOS,BANDW=0,MAX­
RTD=0,MINTHRPT=0,SIGPTHSW=STD,QOSSTAT=NO;
CHA-STMIB:MTYPE=NCUI2,LTU=18,TYPE=H323,Q931T1=50,Q931T2=500,GWNAME="HG3575-2";
CHA-STMIB:MTYPE=NCUI2,LTU=18,TYPE=DMCDATA,DMCALLWD=NO,DMCCONN=0;
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=SNMP,CS1="public";
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=WBMDATA,LOGINWBM="HP4K-DEVEL",ROLE=ENGR;
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=WBMDATA,LOGINWBM="HP4K-SU",ROLE=SU;
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=WBMDATA,LOGINWBM="HP4K-ADMIN",ROLE=ADMIN;
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=WBMDATA,LOGINWBM="HP4K-READER",ROLE=READONLY;
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=GWSECTOR,GWSECTNO=0;
CHA-STMIB:MYTPE=NCUI2,LTU=18,TYPE=DLSDATA,DLSPORT=10444,DLSACPAS=NO;

WBM configuration

CLI configuration