Because the phone number format for Italian mobile phones is different,
the phone numbers in the OpenScape Voice direction are modified incorrectly
if the following configuration information is not observed.
Generation (example)
Configure DAR=TIE in the central office direction:
ADD-WABE:CD=901,DAR=TIE;
Set up a separate direction to the central office for
the Italian mobile phone numbers:
ADD-RICHT:MODE=LRTENEW,LRTE=393,LSVC=ALL,
NAME=ITALIANMOBILE,TGRP=XX,DNNO=1-1-393,ROUTOPT=NO,REROUT=NO,DESTNO=193,FWD
SWTCH=YES;
ADD-LODR:ODR=393,CMD=ECHO,FIELD=3;
ADD-LODR:ODR=393,CMD=NPI,NPI=ISDN,TON=UNKNOWN;
ADD-LODR:ODR=393,CMD=END;
ADD-LDAT:LRTE=393,LSVC=ALL,TGRP=XX,ORD=393,LAUTH=1;
ADD-LDPLN:LCRCONF=LCRPATT,DIPLNUM=0,LDP=0-W-3,LRTE=393,
LAUTH=1;
Set up a separate direction to the central office for
the Italian mobile phone numbers (if the phone number is dialed with
a country code):
ADD-RICHT:MODE=LRTENEW,LRTE=394,LSVC=ALL,
NAME=ITALIANMOBILE,TGRP=XX,DNNO=1-1-393,ROUTOPT=NO,REROUT=NO,DESTNO=193,FWD
SWTCH=YES;
ADD-LODR:ODR=394,CMD=ECHO,FIELD=4;
ADD-LODR:ODR=394,CMD=NPI,NPI=ISDN,TON=UNKNOWN;
ADD-LODR:ODR=394,CMD=END;
ADD-LDAT:LRTE=394,LSVC=ALL,TGRP=xx,ORD=394,LAUTH=1;
ADD-LDPLN:LCRCONF=LCRPATT,DIPLNUM=0,LDP=0-W-0039-3,LRTE=394,
LAUTH=1;
Create a KNDEF entry with TYPE=FOREIGN for the
Italian mobile phone numbers:
ADD-KNDEF:NNO=1-1-393,TYPE=FOREIGN,ISDNCC=39;
Add the COT parameter DCCO to allow a node number to be
derived:
CHA-COT:COTNO=YY,COTTYPE=COTADD,COTPAR=DCCO;