Checking of the used bandwidth of all sectors:

DISPLAY-GKTOP:TYPE=RESMGMT1,SCOPE=DYN;

When it is required to check the implementation of the resource management, it is sufficient at first to establish speech connections over all configured paths. Then when the permitted bandwidth in a sector is exceeded, a path occupancy should be obtained.

No bandwidth available

When Resource Manager is configured sometimes connections will be blocked if no resources are free. In such a case an F4436 advisory message is signalled. Usually the reason for the error message is a correct one and defined by configuration i.e. more connections are attempting to use a path than are allowed in the AMO GKTOP configuration or that a DMC connection was restricted via the AMO GKTOP attribute NODMC. In some rarer cases, the advisory is signalled due to hanging bandwidth, meaning a DIS-GKTOP will show bandwidth is used even though no connections are active over the specific path. Hanging bandwidth can be verified by executing a DIS-GKTOP in a low period of traffic.

The F4436 error message contains important information regarding exactly which route is not available.