Collapse AllExpand All

2.9.2. Bootstrapping with "Default PIN" or "Individual PIN" PIN Mode Previous topic Parent topic Child topic Next topic

Variant A:

  1. Create a virtual IP device in the DLS under IP Devices > IP Device Management > IP Device Configuration > "DLS Connectivity" tab and then select the required PIN mode.
  2. Contact the gateway in DLS via IP Devices > IP Device Interaction > Scan IP Devices. Enter 8084 in the Port field in the "IP Ranges" tab.
  3. Enter the CLI command activate dls pin <pin> at the gateway with the PIN displayed under 1.

Variant B:

  1. Create a virtual IP device in the DLS under IP Devices > IP Device Management > IP Device Configuration > "DLS Connectivity" tab and then select the required PIN mode.
  2. Enter the IP address of the DLS server at the gateway with the CLI command set dls ip_address. The port is usually 18443.
  3. Enter the CLI command contact DLS at the gateway.
  4. Enter the CLI command activate dls pin <pin> at the gateway with the PIN displayed under 1
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.