2.10.3. Important Notes 
- The resetting of the NCUI board is carried out via the OpenScape 4000 Expert Access application (also known as Comwin).
- Use the “Telnet Terminal screen” as the normal dialogue prevents the NCUI's prompts from being displayed correctly. The settings are 38400, 8, none, 1. Check 'End Of Command' (under Telnet > Parameter > Edit) is set to CR and not ETX. Of course other terminal programs can be used.
- When entering commands to the NCUI card it is important to use the correct case as it does make a difference. The lower case “w” will load software image via FTP and copy to TFFS whereas the upper case “W” will load file via FTP and copy to TFFS.
The output from the NCUI board is shown in
courier font,
manual actions or text inputs are shown in blue.