2.12.4. TYPE ASC - Changing the Payload QoS Setting of the
Access Point 
In this branch, the Quality of Service for the payload of an access
point can be configured. The settings can differ from access point to
access point. If the routers do not support DiffServ, the standard TOS
value must be configured without DiffServ. If DiffServ is supported,
but not the CodePoints, the value specified by the network operator must
be configured.
In the example, the standard TOS value is set for AP 99 without DiffServ
(see also Table 3,
“TOS values”).
 |
Configuration Management > System Data
> IPDA > IPDA Access Point
Click Search and select
the access point.
Enter the TOS bytes under Layer 3-Diffserv on
the Quality of Service tab and Save.
|
 |
CHANGE-STMIB:MTYPE=NCUI2,LTU=99,TYPE=ASC,TOSPL=16; |
This change is started directly on the access point and is effective
immediately without an interruption in operation.