Collapse AllExpand All

2.13.2. AMOs Previous topic Parent topic Child topic Next topic

  • The STMI boards are configured with the AMO CGWB or, if the IPDA was set, with the AMO BCSU (see Chapter 15, “Multiple Feature Support Configuration at the Common Gateway (Example)”).
  • The NCUI board is still configured with the AMO STMIB.
  • AMO BFDAT is used for block configuration.
  • Functions are consolidated on a single board using the AMO BCSU.
  • The DB line range of a board must be consecutive.
  • All HG 3500 modules must be connected at the OpenScape 4000 LAN segment.
  • The lines configured for a board cannot be subsequently modified. The entire board must be reconfigured if additional lines are required on a board.
  • The parameter FCTID in the AMO BCSU must always be set to 1.
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.