2.14.4. TYPE DMCDATA - Changing the HG 3500 Setting to Support
Direct Media Connections 
Use this parameter to set the number of simultaneous direct media
connections permitted on a certain HG 3500. The connections are counted
both in the OpenScape 4000 central system’s software and on the board
itself.
 |
Configuration Management > System Data > Board >
Board
Click Search and select STMI.
Make the settings on the STMI Board Data tab under
Number of DMC connections and Save.
Configuration Management > System Data > Maintenance
> Board Maintenance
Click Search and select STMI.
Click Execute on the Action pull-down menu, select
Restart and confirm with OK.
|
 |
CHANGE-CGWB:MTYPE=CGW,LTU=5,SLOT=91,TYPE=DMCDATA,DMCCONN=30;
This change does not become effective on the HG 3500 until
this board is restarted with
RESTART-BSSU:ADDRTYPE=PEN,LTU=5,SLOT=91.
|
IMPORTANT:
Existing links are disconnected.