Collapse AllExpand All

2.18.7. SSL for WBM Previous topic Parent topic Child topic Next topic

SSL for WBM (i.e. https) is enabled in the factory delivered status. It cannot be disabled.
To permit a basic configuration of SSL following commands are needed.
  • Display the fingerprint of the currently active certificate for WBM access via https.
show fingerprint
  1. Before accepting a certificate warning in the browser, it is strongly recommended that the administrator should compare the fingerprint of the certificate displayed in the browser against the fingerprint shown in CLI. The certificate must be accepted only, if both fingerprints are identical!
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.