Collapse AllExpand All

14.2.5.1. STMI2/4 and STMIX/STMIY Board Configuration Previous topic Parent topic Child topic Next topic

assistant-2.gif
Configuration Management > System Data > Board > CGW Function Block
Click New, enter data and click Save.
Configuration Management > System Data > Board > Board
Click New, enter data (header information, General Board Data tab, STMI2-IGW Board Data tab, CGW Functionalities tab) and Save.
sip_0016-2.gif
 
ADD-BFDAT:FCTBLK=1,FUNCTION=SIP,BRDBCHL=BCHL60;

CHANGE-BFDAT:CONFIG=CONT,FCTBLK=1,FUNCTION=SIP,LINECNT=10,BCHLCNT=10;

CHANGE-BFDAT:CONFIG=OK,FCTBLK=1,ANSW=YES;
ADD-BCSU:MTYPE=IPGW,LTG=1,LTU=1,SLOT=49,PARTNO=”Q2316-X “,FCTID=1,FCT­
BLK=1;
ADD-CGWB:LTU=1,SLOT=49,SMODE=NORMAL,IPADR=1.40.41.105,NET­
MASK=255.255.255.0,DEFRT=1.40.41.254;
The Parameter GWAUTREQ and SIPREG must be set to NO,in situations where the board is used for SIP Subscriber. 
CHANGE-CGWB:MTYPE=CGW,LTG=1,LTU=1,SLOT=49,TYPE=SIPTRERH,GWAUTREQ=NO;
CHANGE-CGWB:MTYPE=CGW,LTG=1,LTU=1,SLOT=49,TYPE=SIPTRSSA,SIPREG=NO;
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.