Collapse AllExpand All

14.5.7.2. Configuration options Previous topic Parent topic Child topic Next topic

The two parameters should be set via AMO CGWB:
  • AMO CGWB: TYPE=GLOBIF, WPUBIP=<near-end NAT public IP address>
  • AMO CGWB: TYPE=GLOBIF, USEWANIF=<YES/NO> (optionally configurable to support far-end home base NAT for SIP@Home subscribers)
  • INFO:
    This AMO command is relevant for SoftGate only, resp. vHG3500 board in SoftGate. For real GWs - i.e. STMI, STMIX/STMIY - this parameter is not allowed to be changed by AMO command. Its default value is "NO".
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.