11.2.7. Removing Access Points/OpenScape 4000 SoftGates from the AP Emergency
Configuration 
You can remove an access point/OpenScape 4000 SoftGate from the AP
Emergency configuration at any time.
IMPORTANT:
When you delete an access point/OpenScape 4000
SoftGate from the AP Emergency configuration, its possible weighting
contribution to the weighting algorithm of the emergency group to which
it belonged is also deleted. Verify whether the emergency group’s limiting
value “
THRSHLD“ is still a valid number.
 |
Configuration Management > System Data
> IPDA > IPDA Access Point
Click Search and select
the access point/OpenScape 4000 SoftGate.
Delete the Emergency
Group Number on the AP Emergency tab and Save.
|
 |
|
The modified data does not take effect until after you have used OpenScape
4000 Assistant Backup & Restore to copy the database to the CC-AP/Survivable
OpenScape 4000 SoftGate, and the CC-AP/Survivable OpenScape 4000 SoftGate
has accepted it.