Collapse AllExpand All

7.3.4.1. Number of Internal and External Gateways Previous topic Parent topic Child topic Next topic

This step is used to configure a table containing general administrative data for all internal and external gateways in the network. An entry is required for each gateway.
IMPORTANT:
You can skip this section if there is no gatekeeper configured at the local OpenScape 4000 system (AMO ZANDE: GATEKPR=NO).

Add:

comwin-2.gif
 
ADD-DIMSU:TYPE=SYSTEM,GWREG=25;
Use this command to set the number of network-based gateways (in our case 25) that can address the Large Enterprise Gatekeeper.

Display:

comwin-2.gif
 
DISPLAY-DIMSU:TYPE=SYSTEM;
Use this command to output all system parameters including the number of gateways permitted.
comwin-2.gif
 
DISPLAY-DIMSU:TYPE=ALL,PARAM=GWREG;
Use this command to output only the number of gateways permitted.
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.