7.3.4.3. Number of LCR Digit Patterns for Digit Pattern Pools 1 through
8 
This step configures the number of LCR digit patterns permitted in
each of the eight available digit pattern pools. Up to 64,000 digit patterns
are permitted in each pool. The digit patterns configured are evaluated
during IP trunking as part of least cost routing.
IMPORTANT:
You can skip this section if there is no gatekeeper
configured at the local OpenScape 4000 system (AMO ZANDE: GATEKPR=NO). In
this case, the default configuration is sufficient with LCR pool 1 and
dial plan 0.
Add:
 |
ADD-DIMSU:TYPE=NETWORK,LDPLN1=50000,LDPLN2=12000,LDPLN4=5600; |
Use this command to set the maximum number of LCR digit patterns per
digit pattern pool, in our case:
- 50,000 digit patterns in digit pattern pool 1
- 12,000 digit patterns in digit pattern pool 2
- 5,600 digit patterns in digit pattern pool 4
Display:
|
|
|
Use this command to output all parameters associated with network-wide
features, including the number of digit pattern schemes in digit pattern
pools 1 through 8.
|
|
|
Use this command to output only the number of LCR digit pattern schemes
permitted in pool 2.