9.4.1.1. OpenStage terminal in combination with an optiClient 
General hints for the configuration of an optiClient together with an openStage phone
- The OpenStage of type "nn" has to be configured with the fitting standard key layout "openStage nn".
- It is not allowed to change the key assignment for an OpenStage phone (AMO TAPRO) while the optiClient is active.
- The individual change of key settings by the subscriber must not be enabled for the combination optiClient/openStage.
- When the user previously owned the combination optiClient/optiPoint then he/she is to be informed about the new key layout which can be seen in the optiClient application. Reason for this are the fixed key functions at OpenStage phones.
- In case of disregarding the mentioned restrictions the proper key assignment cannot assured when changing from OpenStage to optiClient and vice versa. This can be repaired only with deleting and configuring the complete connection again.
- This procedure counts also for the so called Tandem-Mode (optiClient uses the same number like the home station. In this case is the home station the OpenStage!)
Configuration of a new optiClient/OpenStage connection
- New configuration of the openStage phone with the proper standard key layout together with the configuration of the optiClient (OPTIIP&API).
- The device "optipoint 420 advance" has to be chosen in the optiClient application.
Replacement of an existing optiClient/optiPoint configuration with optiClient/OpenStage
- Regeneration of the user data
- Delete the connection completely
IMPORTANT:
The deletion is necessary because it is currently the
exclusive way to delete the so-called shadow table for key assignments.
If it is not cleared correctly, the proper key assignment is not assured
neither at the optiClient nor at the OpenStage. It depends on what had
happened at the connection previously (i.e. different phone types were
connected etc.) if the shadow table has to be cleared.
- Now you can exchange the phones and then configure the OpenStage as described in General hints for the configuration of an optiClient together with an openStage phone or do it vice versa.
IMPORTANT:
For additional information, refer to "’Mobile Registration’
with OpenStage Hardware Terminals" in the optiClient readme file.