14.7.4.1.4. Hint for National and Local Dialling 
For OpenScape 4000 users it makes sense to dial with national numbering,
too.
E.g. station +49(89)722-31256 can be reached with dialing
|
31256
|
// If closed numbering is configured
|
|
000498972231256
|
// always
|
|
0-722-31256
|
// local dialing
|
|
0-089-722-31256
|
// national dialing
|
If this local or national dialing is requested from OpenScape 4000
users, some special additional LCR-configuration must be done. This configuration
is not part of this description because there is no need from the OpenScape
Voice side. Please refer to OpenScape 4000, Volume 3: Feature Usage
Examples service documentation.
Example closed numbering
Also for closed numbering the LCR for international dialing must be
configured (see Section 7.9,
“OpenScape Voice Routing for International Dialing - Extend Dialed Numbers to International Number”).
This is an example for destination number DN=31256. DN=31256 stays
for +49(89)722-31256
Use the E.164 numbering scheme for OpenScape 4000 and OpenScape Voice
interworking.
In internal ISDN messages even the called number should use E.164
with
- Numbering plan identifier: ISDN
and
- Type of number: INTERNATIONAL.
Make sure to outpulse missing digits with AMO LODR (e.g.
ADD-LODR=xxx,CMD=OUTPULSE,DGTS=4989722;).
AMO WABE defines the access code.Example for AMO WABE with destination number 31256 and NETRTE=224:
ADD-WABE:CD=224,DAR=NETRTE; DIS-WABE:TYPE=GEN,CD=224; H500: AMO WABE STARTED ------------------------------------------------------------------------------ | DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS | ------------------------------------------------------------------------------ | | CALL PROGRESS STATE |NODE/DIGIT| RESERVED/CONVERT | | CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO | | |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE | ------------------------------------------------------------------------------ | 224 |* ..... ..... ..... ..... ..| NETRTE | | ------------------------------------------------------------------------------ AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES DISPLAY COMPLETED; ADD-WABE:CD=31256,DAR=STN,CHECK=N; CHANGE-WABE:CD=31256,DESTNO=218; DIS-WABE:TYPE=GEN,CD=31256; H500: AMO WABE STARTED ------------------------------------------------------------------------------ | DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS | ------------------------------------------------------------------------------ | | CALL PROGRESS STATE | DIGIT | RESERVED/CONVERT | | CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO | | |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE | ------------------------------------------------------------------------------ | 31256 |. .**** ***** **... ..... .*| STN | | | | | |DESTNO 218 | | | | |DNNO 0- 0-218 | | | | |PDNNO 1- 1-218 | ------------------------------------------------------------------------------ AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES DISPLAY COMPLETED;
AMO RICHT is used to prepare trunk groups.
Example for AMO RICHT with CD=224 (defined with AMO WABE),
LRTE=224 (used later with AMO LDAT) and TGRP=240 (pre-configured
with AMO BUEND)
ADD-RICHT:MODE=CD,LRTE=224,CD=224,CPS=0,SVC=ALL,NAME="OSV & MEDIA TRIX",TGRP1=240,DESTNO=240,DNNO=218,PDNNO=1-1-218,CHARCON=NEUTRAL,NOPRCF WD=NO,CLNAMEDL=NO; CHANGE-RICHT:MODE=CD,CD=224,CPS=0,SVC=VCE,TYPE=DTMF,DTMFCNV=FIX,DTMFPULS=PP300; DIS-RICHT:MODE=CD,CD=224,CPS=0; H500: AMO RICHT STARTED +------------------------------------------------------------------------------+ | ROUTES FOR ALL DPLN SVC = VCE | | | +-------+------------------+----+-+------------------------------+-----+----+--+ |CODE |NAME, CQMAX, |TGRP|P| DTMF | LRTE|CPAR| F| | |DESTNO AND CPS |CCNO|L+---+---+----------------+-----+ | | W| | | 1 111112| |B|CNV|DSP| TEXT |PULS | | | D| | |12345 67890 123452| | | | | |PAUSE| | | B| +-------+------------------+----+-+---+---+----------------------+-----+----+--+ |224 |..... ..... ......| 240| | F | W | |PP300| 224| | | |NEUTRAL|OSV & MEDIATRIX | | | | | | | | | | | |DNNO: 218 | | | | | | | | | | | |PDNNO: 1 -1 -218 | | | | | | | | | | | |DESTNO :240 | | | | | | | | | | | |ROUTOPT :YES | | | | | | | | | | | |REROUT :YES | | | | | | | | | | +-------+------------------+----+-+---+---+----------------+-----+-----+----+--+ +------------------------------------------------------------------------------+ | ROUTES FOR ALL DPLN SVC = FAX | | | +-------+------------------+----+-+------------------------------+-----+----+--+ |CODE |NAME, CQMAX, |TGRP|P| DTMF | LRTE|CPAR| F| | |DESTNO AND CPS |CCNO|L+---+---+----------------+-----+ | | W| | | 1 111112| |B|CNV|DSP| TEXT |PULS | | | D| | |12345 67890 123452| | | | | |PAUSE| | | B| +-------+------------------+----+-+---+---+----------------------+-----+----+--+ |224 |..... ..... ......| 240| | | | | | 224| | | |NEUTRAL|OSV & MEDIATRIX | | | | | | | | | | | |DNNO: 218 | | | | | | | | | | | |PDNNO: 1 -1 -218 | | | | | | | | | | | |DESTNO :240 | | | | | | | | | | | |ROUTOPT :YES | | | | | | | | | | | |REROUT :YES | | | | | | | | | | +-------+------------------+----+-+---+---+----------------+-----+-----+----+--+ +------------------------------------------------------------------------------+ | ROUTES FOR ALL DPLN SVC = DTE | | | +-------+------------------+----+-+------------------------------+-----+----+--+ |CODE |NAME, CQMAX, |TGRP|P| DTMF | LRTE|CPAR| F| | |DESTNO AND CPS |CCNO|L+---+---+----------------+-----+ | | W| | | 1 111112| |B|CNV|DSP| TEXT |PULS | | | D| | |12345 67890 123452| | | | | |PAUSE| | | B| +-------+------------------+----+-+---+---+----------------------+-----+----+--+ |224 |..... ..... ......| 240| | | | | | 224| | | |NEUTRAL|OSV & MEDIATRIX | | | | | | | | | | | |DNNO: 218 | | | | | | | | | | | |PDNNO: 1 -1 -218 | | | | | | | | | | | |DESTNO :240 | | | | | | | | | | | |ROUTOPT :YES | | | | | | | | | | | |REROUT :YES | | | | | | | | | | +-------+------------------+----+-+---+---+----------------+-----+-----+----+--+ AMO-RICHT-111 TRUNK ROUTING DISPLAY COMPLETED;
AMO LODR defines the outdial rule.
Example for AMO LODR with ODR=240 (use for AMO LDAT).
ADD-LODR:ODR=240,CMD=OUTPULSE,DGTS=4989722; ADD-LODR:ODR=240,CMD=ECHO,FIELD=1; ADD-LODR:ODR=240,CMD=NPI,NPI=ISDN,TON=INTERNAT; ADD-LODR:ODR=240,CMD=END; ADD-LODR:ODR=240,INFO="OSV"; DIS-LODR:ODR=240; H500: AMO LODR STARTED +-------------------------------------------------------+ | ODR POSITION CMD PARAMETER | +--------+----------------------------------------------+ | 240 | 1 OUTPULSE 4989722 | | | 2 ECHO 1 | | | 3 NPI ISDN | | | 4 TON INTERNAT | | | 5 END | +--------+----------------------------------------------+ |INFO:OSV | +-------------------------------------------------------+ H03: THE NEXT FREE ODR IS 2 AMO-LODR -111 ADMINISTRATION OF LCR OUTDIAL RULES DISPLAY COMPLETED;
AMO LDAT defines the least cost routing data.
Example for AMO LDAT with TGRP=240 (defined with AMO BUEND),
ODR=240 (defined with AMO LODR) and LROUTE=224 (defined
with AMO RICHT)
ADD-LDAT:LROUTE=224,LSVC=ALL,LVAL=1,TGRP=240,ODR=240,LAUTH=16,CARRI ER=1,ZONE=EMPTY,VCCYC=4; DIS-LDAT:TYPE=ALL,LROUTE=224; H500: AMO LDAT STARTED +------------------------------------------------------------------------------+ | LROUTE = 224 NAME = OSV & MEDIATRIX SERVICE = ALL | | TYPE = NWLCR DNNO OF ROUTE = 218 | | SERVICE INFO = | +------+-----+-----+----+-----+----------+-----------+----------+------+-------+ | | | | | | SCHEDULE | CARRIER | | | | |LRTEL | LVAL|TGRP | ODR|LAUTH| ABCDEFGH | ZONE| LATTR | LDSRT|COTIDX | +------+-----+-----+----+-----+----------+-----------+----------+------+-------+ | 1| 1| 240| 240|16 | ******** | 1 EMPTY| | | 0 | +------------------------------------------------------------------------------+ AMO-LDAT -111 LCR-DIRECTIONS DISPLAY COMPLETED;