Collapse AllExpand All

19.2.3.5. H.323 stack on IPDA boards Previous topic Parent topic Child topic Next topic

The H.323 stack on IPDA boards has to be configured using the following AMO commands:
  • NCUI:
CHANGE-STMIB:MTYPE=NCUI2,TYPE=H323,GWNAME=<string>;
  • STMI:
  • These settings are not possible via AMO. Please use WBM of the board.
    For the correct numerical values please refer to the configuration manual for IPDA boards.
    In addition, the codecs used for the DMC must be configured (Master Connection codecs see AMO SDAT / AMO TACSU / AMO TDCSU).
  • NCUI:
CHANGE-STMIB:MTYPE=NCUI2,LTU=xx,TYPE=ASC,PRIO=PRIO1,CODEC=G729; 
CHANGE-STMIB:MTYPE=NCUI2,LTU=xx,TYPE=ASC,PRIO=PRIO2,CODEC=G711;
  • STMI:
CHANGE-CGWB:MTYPE=CGW,LTU=xx,SLOT=xx,TYPE=ASC,PRIO=PRIO1,CODEC=G729; 
CHANGE-CGWB:MTYPE=CGW,LTU=xx,SLOT=xx,TYPE=ASC,PRIO=PRIO2,CODEC=G711;
  1. WBM > Configuration > Voice Gateway > Codec Parameters
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.