123.3.1
EINRICHTEN-KNFOR
Mit diesem Kommando werden eine Zielknotennummern in einem Rufnummernplan (NPI =PRIVATE oder ISDN) mit den Werten für TONIN/TONOUT, SCRE, SENDCALL, SENDCONN, OVRDCAT und FEHLOPT in die Knotenformattabelle eingetragen.
Prozedurübersicht
Kommandocode
Parameter
EINRICHTEN-KNFOR
ZKNNR=<number>
|,NPI=ISDN,{(min=1) TONIN=<param>,TONOUT=<param>}
,[SCRE=<param>],[SENDCALL=<param>],[SENDCONN=<param>]
,[OVRDCAT=<param>],[FEHLOPT=<param>];
|,NPI=PRIVATE,{(min=1) TONIN=<param>,TONOUT=<param>}
,[SCRE=<param>],[SENDCALL=<param>],[SENDCONN=<param>]
,[OVRDCAT=<param>],[FEHLOPT=<param>];
Beispiele
1.
Es wird eine 3-stufige Zielknotennummer für den Rufnummernplan ISDN eingerichtet
Eingabe:
EINRICHTEN-KNFOR:ZKNNR=3-1-20,NPI=ISDN,TONOUT=NATIONAL,SCRE=USERNSCR;
OpenScape 4000 V11, Band 1: AMO Beschreibungen, Servicedokumentation, Ausgabe 2
, ID:
P31003H31B0S107027620
©
11/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.