125.2.2.3
Standardkonfiguration
•
Für NPI=ISDN, PRIVATE wird die formatabhängige Modifikationsmethode benutzt, die mit den AMO’s AMO’s KNFOR, KNPRE, TDCSU und KNDEF konfiguriert wird.
•
Der logische Knoten EIGEN wird durch die im AMO
KNDEF
,TYP=EIGEN konfigurierten Knoten ersetzt.
•
Für NPI=UNKNOWN reicht normalerweise eine Standardkonfiguration aus. Dafür werden die logischen Knoten benutzt. Als Beispiel wird ein 1-stufiges, offen nummeriertes Netz gewählt. Ein Knoten mit der Knotenkennzahl 911 (entspricht den Rufnummern 911xxxxx, wobei xxxxx die "lokale" Rufnummer, d.h. ohne die Kennzahlen darstellt) wird folgendermaßen konfiguriert:
Eingabe:
AENDERN-KNMAT:UNKNOWN,0,,EIGEN,,ALLKN,,ABG,911; /* Ebene 0 Knotenkennzahl = 911 */
AENDERN-KNMAT:UNKNOWN,0,,ALLKN,,EIGEN,,ANKE&TRANSI,,911;
Ausgabe, wenn beispielsweise in der KNDEF-Tabelle unter TYP=EIGEN nur KNNR=15 konfiguriert ist (1. Meldung bei Kommando 1, 2. Meldung bei Kommando 2):
H08: UKNL=EIGEN WURDE GEMAESS DER KNDEF-TABELLE NACH UKNNR=15 UMGESETZT.
H08: ZKNL=EIGEN WURDE GEMAESS DER KNDEF-TABELLE NACH ZKNNR=15 UMGESETZT.
OpenScape 4000 V11, Band 1: AMO Beschreibungen, Servicedokumentation, Ausgabe 2
, ID:
P31003H31B0S107027620
©
11/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.