6.3.1 ADD-ACMSM

This function is used to configure the ACL application communication parameters, for the ACL Manager.


Command Code	Parameter
ADD-ACMSM	[UNIT=<param>],APPLNO=<number>
	\|,TYPE=TRACE,ACLAPPL=<string>,PBXAPPL=<string>
	,PROCID=<string>;
	\|,TYPE=ACLAPPL,ACLAPPL=<string>,PBXAPPL=<string>
	,PROCID=<string>,ACCESS=<param>,[PASSWD=<string>]
	\|,[PACKAGE=Y],MAXSBYTE=<number>,MAXRBYTE=<number>;
	\|,[PACKAGE=N];

Examples

Create a configuration for the host-based application "DECAPPL" and which enables message packaging.

Input:

ADD-ACMSM:A1,16,ACLAPPL,"DECAPPL","ACM","H1",CB,"DECPWD",Y,500,750;

Output:

Start- and End message

Create a configuration for the host-based application "DICAPPL" and which disables message packaging.

Input:

ADD-ACMSM:A1,17,ACLAPPL,"DICAPPL","ACM","H1",CB,,N;

Output:

Start- and End message

Create a configuration for the ACL Message Trace Function.

Input:

ADD-ACMSM:A1,18,TRACE,"TRACE","ACM","TRACEPRC";

Output:

Start- and End message

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.