6.5 Error Messages and Advisories

6.5.1 Error Messages


F01:	APPLICATION NUMBER @@@ HAS NOT BEEN CONFIGURED.
F02:	IN THE UNIT @@, THE NUMBER @@@ HAS ALREADY BEEN ASSIGNED TO THE
	APPLICATION @@@@@@@@.
F03:	APPLICATION @@@ IS NOT CURRENTLY SIGNED ON.
F04:	EVENT STREAM WAS TURNED OFF BY @@@ AND THEREFORE CANNOT BE TURNED
	ON BY THE AMO.
F05:	THE COMBINATION ACLAPPL=@@@@@@@@, PBXAPPL=@@@@@@@@, PROCID=@@@@@@@@
	MAY ONLY BE USED ONCE.
F07:	FOR THE UNIT @@ AND APPLNO @@@ EXIST NO CONFIGURATION IN THE DATABASE.
F08:	EVENT STREAM SWITCHING ON/OFF CURRENTLY NOT ALLOWED.
F09:	DATABASE IS FULL; NO MORE PARAMETER CONFIGURATIONS ALLOWED.
F10:	TO ENABLE MESSAGE PACKAGING, THE MAXIMUM NUMBER OF BYTES ACL APPLICATION
	MAY RECEIVE IN ONE MESSAGE MUST BE ENTERED.
F11:	THE ENTERED NAME @@@@@@@@ MUST NOT START WITH A BLANK.
F12:	THE APPLICATION NUMBER @@@ IS ASSIGNED TO A TRACE FUNCTION.
F15:	NO MESSAGE FROM ACL MANAGER
F16:	TURN ON/OFF EVENT STREAM NOT POSSIBLE BECAUSE ACM IS NOT ACTIVE.
F17:	TO ENABLE MESSAGE PACKAGING, THE MAXIMUM NUMBER OF BYTES ACL APPLICATION
	MAY SEND IN ONE MESSAGE MUST BE ENTERED.
F18:	THE REASON @@@ RECEIVED FROM THE ACL MANAGER IS UNKNOWN.
F19:	THE EVENT STREAM CAN NOT BE TURNED ON BY THE AMO BECAUSE IT
	WAS TURNED OFF BY ACM FLOW CONTROL.
F20:	(CAN OCCUR ONLY IN USA SWITCHES) THE PARAMETER BRANCH ACCESS = CB CANNOT BE USED IN THE USA;
	IN THE USA ACCESS = ECCS MUST BE USED.
F21:	THE PARAMETER BRANCH ACCESS = ECCS CANNOT BE USED;
	PLEASE USE, ACCESS = CB.
F22:	DATA BASE CAN NOT BE ACCESSED.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.