7.2.1 ADD-ACSU

This function is used to assign an attendant console.
The port location of the attendant console to be assigned is identified with the parameter PEN. An available port must be configured for this PEN. The suitable board type depends on the value of the parameter ACTYPE.
The ATND type is selected by the parameter ACTYPE.
The parameter SATNDNO determines whether the personal number of an ATND (ATNDNO)
a)
does appear on the display of an internal or external station (SATNDNO=NO),
b)
does not appear on the display of an internal or external station (SATNDNO=YES)
c)
or does not appear on the display of an external station (SATNDNO=ONLYEXT). A default number will be displayed. The default number is assigned by the AMO KNMAT.
(CHANGE-KNMAT:NPI=ISDN,LEVEL=<nr>,DNNO=<nr>,DNNOL=OWN,MODCON=OUT&REPEXT,
NUMRED=<nr>;)
The parameter PUBNUM defines the public telephone number. Related to the public telephone number the type of number (TON) and the numbering plan identification can be entered. An entry for TON and NPI will be ignored if no value for PUBNUM is entered. An advisory message is displayed.
The following combinations of parameter NPI and TON are allowed:
 
NPI=ISDN(E.164)               NPI=PNP(private)
NPI=UNKNOWN
TON=INTERNAT
(international number)
TON=L2REGIO
(level 2 regional number)
TON=UNKNOWN
TON=NATIONAL
(national number)
TON=L1REGIO
(level 1 Regional number)
TON=SUBSCR
(subscriber number)
TON=LOCAL
(local number)
TON=UNKNOWN
(unknown)
TON=UNKNOWN
(unknown)
 
TON=ABBR
(abbreviated number)
Procedure Overview
 
Command Code
Parameter
ADD-ACSU
ATNDNO=<number>,PEN=<gg-u-sss-cc>,DPLN=<number>
 
,COS=<number>,[LCOSV=<number>],[SPDC1=<number>]
 
,[SPDC2=<number>,[LANG=<param>],[ACTYPE=<param>]
 
,[EOVR=<param>],[SATNDNO=<param>]
 
,[NNO=<number>],[SRCGRP=<number>],[CLASSMRK=<param>]
 
,[PUBNUM=<number>],[TON=<param>],[NPI=<param>];
 
,[STNOOOS=<number>],[STNOAPE=<param>],
 
,[AMOALTRT=<param>],[CLUSTID=<number>];
Example
Adding an ATND
Input:
ADD-ACSU:ATNDNO=390,PEN=1-1-115-7,DPLN=0,COS=1,LANG=GER,ACTYPE=ACWMQ;
Output:
H02 : ATNDNO 390 NEEDS TO BE ASSIGNED TO AN ATND GROUP
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.