7.3 Parameter Descriptions


ACTYPE	AC-Type
	Type of Input	:	Single value, optional
	Possible Values		AC4	ac connect to slmo or slmq.
			ACWMQ	ACWIN with multiple queue mode
			ACWMQIP	ACWINIP with multiple queue mode
			ACW2Q	ACWIN with double queue mode.
			ACW2QIP	ACWINIP with double queue mode.
	Default Value	:	AC4

AMOALTRT	amo alternate routing
	Type of Input	:	Single value
			ADD, CHANGE:	1 single value,optional
	Possible Values	:	YES,NO

	Default Value	:	NO
ATNDNO	Attendant calling number
	Type of Input	:	Single value, mandatory
			ADD:	1 single value, mandatory
			DELETE, CHANGE:	1 to 2 values, mandatory, concatenated with & or &&
			DISPLAY, REGENERATE:	1 to 2 values, optional, concatenated with & or &&
	Possible Values	:	0 - 9, up to 12 characters, ATNDNO must exist in numbering plan

CLASSMRK	DNIL classmarks
	Type of Input	:	0 to 4 single values, concatenated with &, optional
	Possible Values		EC	Echo Cancellation
			G711	Voice compression via G711
			G729	Voice compression (mandatory) according to G.729A
			G729OPT	Voice compression (optional) according to G.729A
			INIT	Echo Cancellation, G711, G729OPT
			NONE	no ip classmarks activated
			VAD	Voice activity detection
			HG3530	bandwidth control for IP phone subscriber
			HG3550	bandwidth control for IP trunk
	Default Value	:	INIT	Action ADD

CLUSTID	Cluster ID
	Type of Input	:	Single value
			optional (ADD)
			optional (CHANGE)
	Possible Values	:	0 - 512
			should be 0 for all TDM Phones should be greater than 0 for all HFA Phones
	Default Value	:	0	Action ADD
COS	Class of service of this ATND
	Type of Input	:	Single value
			mandatory (ADD)
			optional (CHANGE)
	Possible Values	:	1 - 1000
	The ATND COS for incoming calls must at least include unrestricted long distance service and unrestricted tie-line access. It is not necessary to verify an ATND’s COS for outgoing calls.

DELOPT	Deletion option
	Type of Input	:	Single value, mandatory
	Possible Values		ALL	delete attendant
			PUBNUM	public telephone number
			SPDC	speed calling central
			STNOOOS	alternate routing number for OOS
			STNOAPE	alternate routing number for AP emergency

DPLN	Feature access group, dial plan
	Type of Input	:	Single value,
			mandatory (ADD)
			optional (CHANGE)
	Possible Values	:	0 - 15

EOVR	Emergency override/forced hold
	Type of Input	:	Single value, optional
	Possible Values	:	Y	[yes]
			N	[no]
	Default Value	:	N

LANG	Language parameter for ATND
	Type of Input	:	Single value, optional
	Possible Values	:	BRA	= brazilian
			CAT	= catalan
			CFR	= canadian french
			CROAT	= croatian
			CZ	= czech
			DAN	= danish
			DUT	= dutch
			ENG	= english
			FIN	= finnish
			FRE	= french
			GER	= german
			GRE	= greek
			HU	= hungarian
			ITA	= italian
			NOR	= norwegian
			PO	= polish
			POR	= portuguese
			RUS	= russian
			SLOVAK	= slovakian
			SLOVEN	= slovene
			SPA	= spanish
			SWE	= swedish
			TUR	= turkish
	Default Value	:	GER

LCOSV	LCR class of service for voice-services of this attendant
	Type of Input	:	Single value,
			optional (ADD, CHANGE)
	Possible Values	:	1 - 1000 (ADD, CHANGE)
	Default Value	:	1
	The AC is to be assigned a class of service which contains all LCR authorizations if possible. LCOSV = 1 is reserved for this purpose.

NEWNO	New station number for the ATND
	Type of Input	:	Single value
			optional
	Possible Values	:	0 - 9, up to 6 characters, NEWNO must exist in the numbering plan

NNO	virtual node identification: level2-level1-level0
	Type of Input	:	1 to 3 single values, concatenated with -, optional Levels have to be filled from low to high (e.g. not allowed: 1-0-12)
	Possible Values	:	0 - 999	level0
			0 - 253	level1
			0 - 29	level2

NPI	Numbering plan identification
	Type of Input	:	Single value, optional
	Possible Values	:	ISDN	ISDN (E.164)
			PNP	private numbering plan
			UNKNOWN	unknown
	Default Value	:	UNKNOWN

PEN	Port equipment number of the ATND: LTG-LTU-SLOT-CCT
	Type of Input	:	4 single values, concatenated with -, mandatory
	Possible Values	:	<gg-uu-sss-cc>	numeric, 0-254
			gg	LTG 1
			uu	LTU 1 - 99 (dependent on the system)
			sss	SLOT 1 - 121
			cc	CCT

PUBNUM	Public telephone number
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 9, up to 15 characters

PUBNAME	Public name
	Type of input		Single value, optional
	Possible Values		Text, max 22 characters

SATNDNO	Secret attendant calling number
	Type of Input	:	Single value, optional
	Possible Values	:	NO	= the ATND number does appear on the internal or external station’s display
			YES	= the ATND number does not appear on the internal or external station’s display
			ONLYEXT	= the ATND number does not appear on the external station’s display. A default number will be displayed; assigned by the AMO-KNMAT.
	Default Value	:	NO

SCRGRP	Source group index
	Type of Input	:	single value, optional
	Possible Values	:	0 - 255
	Default Value	:	0

SPDC1	Central speed dialer 1
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 15
	Default Value	:	0

SPDC2	Central speed dialer 2
	Type of Input	:	Single value, optional
	Possible Values	:	0 - 15
	Default Value	:	0

STNOOOS	subscriber individual alternate routing no for OOS
	Type of Input	:	Single value, optional
	Possible Values	:	keyed numeral,up to 22 characters
	Default Value	:

STNOAPE	subscriber individual alternate routing no for AP emergency 2
	Type of Input	:	Single value, optional
	Possible Values	:	keyed numeral,up to 22 characters
	Default Value	:

TON	Type of number
	Type of Input	:	Single value, optional
	Possible Values	:	ABBR	abbreviated number
			INTERNAT	international number
			L1REGIO	level 1 regional number
			L2REGIO	level 2 regional number
			LOCAL	local number
			NATIONAL	national number
			SUBSCR	subscriber number
			UNKNOWN	unknown
	Default Value	:	UNKNOWN

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.