8.3.2
DELETE-ACTDA
Deactivate the features FWD and ’Voice Call Rejection’ for a station.
Procedure Overview
Command Code
Parameter
DELETE-ACTDA
TYPE=<param>,STNO=<number>,
FEATCD=FWD,[CFVAR=<param>],[DTYPE=<param>],
[ITYPE=<param>],[SI=<param>];
| FEATCD=DND
| FEATCD=CWT
| FEATCD=VCR
Example 1
Deactivate FWD for station 250123 in service FAX.
Input:
DELETE-ACTDA:STN,250123,FWD,,,,FAX;
Note:
If one of the parameters CFVAR, DTYPE, ITYPE or SI is specified, only the corresponding forwarding destination is interrogated. For parameters that have not been specified, every possible value is interrogated. In the example above every FWD that has been found for service FAX is deactivated for the station.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.