9.2.4 CHANGE-AFR

Changing the parameter list of an LDU FAMAFR. At least one of the parameters of the list must be specified.


Command Code	Parameter
CHANGE-AFR	LDU=<param>,{PRI=<number>,MAXF=<number>
	,MAXFL=<number>,FSUPV=<number>
	,SETUPLT=<number>,TRSTART=<number>
	,PERIOD=<number>,RETRLT=<number>};
	[,ACTTIME=<number>,MNEGCALL=<number>];

Example

In the FAMAFR2, change the priority of faults that are to be transmitted instantly, to 6, and set the maximum number of high-priority faults that are to be accepted within the time specified in parameter FSUPV to 10.

Input:

CHANGE-AFR:LDU=AFR2,PRI=6,MAXF=10;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.