9.2.8 REGENERATE-AFR

Displaying the parameter list and the fault pair list in the form of commands for regeneration of all 3 FAMAFRs.


Command Code	Parameter
REGENERATE-AFR	;

Example

Input:

REGENERATE-AFR;

Output:

ACTIVATE-AFR: AFR1, LDU&PROT ;
ACTIVATE-AFR: AFR2, LDU&PROT ;
ACTIVATE-AFR: AFR3, LDU ;
ADD-AFR : AFR1, LDU , 4 , 20 , 20 , 60 , 90 , 12-00 , 2 , 5 , 20 ;
DELETE-AFR : AFR1, ALL ;
ADD-AFR : AFR1, TAB,"F5388",OUTSERV,"F5389",INSERV,1,10;
ADD-AFR : AFR2, LDU , 6 , 10 , 20 , 60 , 90 , 12-00 , 2 , 9 , 0 ;
DELETE-AFR : AFR2, ALL ;
ADD-AFR : AFR2, TAB,"F5388",OUTSERV,"F5389",INSERV,1,10;
ADD-AFR : AFR3, LDU , 4 , 20 , 20 , 60 , 90 , 12-00 , 2 , 5 , 60 ;
DELETE-AFR : AFR3, ALL ;
ADD-AFR : AFR3, TAB,"F5388",OUTSERV,"F5389",INSERV,1,10;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.