20.4 Parameter Description

NOTE: Remark: The parameter LDEV can additionally have the value USER. This assignes the logical device ’TELNET TASK OVER USER TASK’. In the table below this parameter value is not mentioned because the TELNET TASK is not officially released.


DLISTGR	Name of the distributor with the receiving terminal devices
	Type of Input	:	Single value, mandatory
	Possible Values	:	No restriction

FILE	File name
	Type of Input	:	Single value, mandatory
	Possible Values	:	All alphanumerical ACSII characters and the special characters ’-’ ’_’ ’#’ ’\|’ ’%’ ’&’ 1st position must be a letter for LDEV=CFILE with prefix "C-"

LDEV	Logical device (branching parameter)
	Type of Input	:	Single value, mandatory
	Possible Values	:	DEFAULT	= device via which the AMO was started
			CO1-CO6	= terminal 1 to terminal 6
			PR1-PR4	= printer 1 to printer 4
			AFR	= automatic fault report
			ATND	= attendant terminal
			FILE	= expandable file on hard disk
			CFILE	= cyclic file on hard disk
			USER	TELNET TASK VIA USER TASK

LEN	Length of file
	Type of Input	:	Single value, mandatory
	Possible Values	:	100000-9999999

SDEV	Symbolic device
	Type of Input	:	Single value, chained single values,
			mandatory
	Possible Values	:	RESULT	= result
			ERR	= error
			DIALOG	= device via which the AMO was started
			PR	= printer
			CON	= terminal
			DPT1-DPT4	= dependability terminal
				1 to 4
			AFR	= automatic fault report
			ATND	= attendant terminal

STNO	Directory number of the receiving terminal device
	Type of Input	:	Single value, mandatory
	Possible Values	:	internal directory number with specified service or valid direction number with external directory number

SVC	Service of the receiving terminal device
	Type of Input	:	Single value, optional
	Possible Values	:	FAX = facsimile

TBL	Device assignment table to be processed
	Type of Input	:	Single value,
			optional (CHANGE and DISPLAY),
			mandatory (REGENERATE)
	Possible Values	:	SCT	= session-specific table
			SATEC	= standard table for external connections
			SATIC	= standard table for internal connections
	Default Value	:	SCT

TYPE	Type of address (branching parameter)
	Type of Input	:	Single value, mandatory
	Possible Values	:	STNO	= a specific terminal device
			DLISTGR	= a list of terminal devices

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.