23.3.2 DISPLAY-AUTH

Action DISPLAY-AUTH can be used to display the permission classes assigned to various AMO actions. The output takes the form of a table with the following three columns: AMO name, action verb and permission class.

To control the kind of output produced one has the optional parameter called TYPE whose default setting lets the current class assignments be shown on the screen (TYPE=ALL), without restricting the set of AMO actions listed. One can also let the standard class assignments be displayed instead of the current settings (TYPE=STD), without restricting the set of AMO actions listed.

Moreover, the output can be restricted to those AMO actions whose permission class differs from its standard value (TYPE=DELTA). One should not be surprised if no output line appears here — it only means that all affected AMO actions are currently set to their default permission class.

The parameters AMO and ACTION are also optional. If parameter AMO is not specified, all AMOs will be processed and listed with their affected actions. If parameter ACTION is not specified, all actions of the affected AMOs will be listed. If both parameters are entered however, one gets exactly one¹ line of output with the AMO name, the action verb and the with the corresponding permission class.

Attention: The reading of hard disk data and their subsequent processing may take up to two minutes.

Procedure Overview


Command Code	Parameter
DISPLAY-AUTH	[AMO=<string>],[ACTION=<string>],[TYPE=<param>];

Examples:

Displaying the current permission class for AMO action ADD-USER:

Input:

DISP-AUTH:USER,ADD;

DISP-AUTH:USER,ADD,ALL;

Displaying the standard permission class for AMO action ADD-USER:

DISP-AUTH:USER,ADD,STD;

Displaying the current permission classes for all actions of AMO USER:

DISP-AUTH:USER;²

Listing those actions of AMO USER whose current permission class differs from the action’s standard permission class:

DISP-AUTH:USER,,DELTA;

Displaying the current permission classes for the ADD actions of all AMOs that possess such an action:

DISP-AUTH:,ADD;³

Listing those ADD actions of all possible AMOs, whose current permission class differs from the action’s standard permission class:

DISP-AUTH:,ADD,DELTA;

Displaying the standard permission class of the ADD actions of all possible AMOs that possess such an action:

DISP-AUTH:,ADD,STD;

Displaying the permission classes of all possible AMO actions:

DISP-AUTH;⁴

Listing those actions of all possible AMOs whose current permission class differs from the action’s standard permission class:

DISP-AUTH:,,DELTA;

10.

Displaying all standard permission classes:

DISP-AUTH:,,STD;

with TYPE=DELTA at most one

or DISP-AUTH:USER,,ALL;

or DISP-AUTH:,ADD,ALL;

or DISP-AUTH:,,ALL;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.