24
AUTHO - Display Stations with Trunk Access
Restrictions
Functions of the AMO
Interrelationships
Error Messages and Advisories
The AMO AUTHO (authorization for CO calls) is used to provide the user with a simple display option for
•
the total number of stations with full or restricted trunk access
•
the total number of stations without trunk access
Each station has 2 classes-of-service (COSs): the main class-of-service COS1 and an alternative class-of-service COS2 to which the station user can switch over (e.g. to prevent unauthorized use of special features).
A station is displayed as having full or partial trunk access even if only one COS contains one of the following classmarks:
•
Partial toll access_1
•
Partial toll access_2
•
Partial toll access_3
•
Partial toll access_4
•
Partial toll access_5
•
Partial toll access_6
•
Full toll access
•
Outward restricted trunk access
•
Full trunk access
Otherwise, the station is listed as having no trunk access.
The number of stations with trunk access and without trunk access are displayed in separate columns in the output table, grouped according to the type of device concerned (VCE, FAX, TTX, VTX and DTE).
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.