25.3.1
ADD-BACK
This action creates the operational parameters for the resident backup task and stores them on hard disk.
The backup parameters can be added (created) even if a specified backup medium or program system is not present at the time. However, the operator must ensure that the missing unit is present when the automatic backup run is carried out.
Date and/or time parameters for the start time of the backup run need only be declared if the values to be specified differ from the current date and/or time.
Procedure Overview
Command Code
Parameter
ADD-BACK
|TYPE=GEN,FILENAME=<string>,[DBNO=<number>]
,[YEAR=<number>],[MONTH=<number>],[DAY=<number]
,HOUR=<number>,MINUTE=<number>
,RTYPE=<param>,RNO=<number>,[TEST=<param>]
,[ASD=<param>],[AROUND =<param>];
|TYPE=PS,SP=<string>;
|TYPE=FILE,FILE=<string>;
Examples
1.
Create an automatic daily backup to cartridge for the IHS and SWU.
Input:
ADD-BACK:PS,"S0-EL0SC"&"D0-EL0DC"&"A0-EL0DC";
2.
Create automatic backup daily
Input:
ADD-BACK:GEN,":SCR:BACKUP/001",2,2001,6,14,23,00,DAYS,1;
3.
Create automatic backup at 8-hourly intervals
Input:
ADD-BACK:GEN,":SCR:BACKUP/001",2,2001,6,14,23,00,HOURS,8;
4.
Create backup for patch administration
Input:
ADD-BACK:FILE,":PDS:PATCH100/";
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.