26.3.4 DELETE-BCSM

Depending on the value specified for the parameter TYPE, the operator can
1.
erase the existing loadware in the BC or cancel the line module entries of a server in the database (first line module in the ADS cannot be canceled).
2.
erase the existing loadware in the EC or cancel the line module entries of a server in the database (first line module in the ADS cannot be canceled).
3.
erase the existing loadware in the SWU or cancel the line module entries of a server in the database (first line module in the ADS cannot be canceled).
Procedure Overview
 
Command Code
Parameter
 
DELETE-BCSM
[UNIT=<param>]
 
 
,TYPE=BC
(1)
 
,CONF=SW,SLOT=<number>,LW=<param>;
 
 
 
 
 
,CONF=HW,SLOT=<number>;
 
 
 
 
 
,TYPE=EC
(2)
 
,CONF=SW,SLOT=<number>,LW=<param>;
 
 
 
 
 
,CONF=HW,SLOT=<number>;
 
 
 
 
 
,TYPE=SWU
(3)
 
,CONF=SW,LCXNO=<number>,LW=<param>;
 
 
 
 
 
,CONF=HW,LCXNO=<number>;
 
Examples
1.
Cancel the line module at slot 13
Input:
DELETE-BCSM:A1,BC,HW,13;
2.
Erase the loadware at slot 13
Input:
DELETE-BCSM:A1,BC,SW,13,TTYBSC;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.