30.4
Parameter Description
COS1
Class of service switchover to COS1
Type of Input
:
single value, group parameter
Possible Values
:
ON, OFF
COS1T
COS1 switchover time
Type of Input
:
composite single value, group parameter
Possible Values
:
hh-mm
hh (00 - 23)
mm (00 - 59)
Minute entries that are divisible by 5 are recommended because
switchovers can only be carried out after each full 5 minutes.
COS2
Class of service switchover to COS2
Type of Input
:
single value, group parameter
Possible Values
:
ON, OFF
COS2T
COS2 switchover time
Type of Input
:
composite single value, group parameter
Possible Values
:
hh-mm
hh (00 - 23)
mm (00 - 59)
Minute entries that are divisible by 5 are recommended because
switchovers can only be carried out after each full 5 minutes.
COSX
Class of service switchover group
Type of Input
:
single value, ranges, chained single values
required (ADD)
optional (DISPLAY, REGENERATE)
Possible Values
:
0 to 15
Default Value
:
0 to 15 (DISPLAY, REGENERATE)
DAY
Day of the week
Type of Input
:
single value, ranges, chained single values
required
Possible Values
:
1 to 7
(1=Mon, 2=Tue, 3=Wed, 4=Thu, 5=Fri, 6=Sat, 7=Sun)
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.