34.3.1
ACTIVATE-BSSM
Before it is activated, the status of the module is determined. If the module is in a state that does not permit activation, no activate job is assigned and the AMO is terminated with a corresponding message to the operator.
The following can be activated:
•
basic shelf of IS
•
extension shelf of IS
•
SWU shelf (PSIO)
Procedure Overview
Command Code
Parameter
ACTIVATE-BSSM
[UNIT=<param>]
,TYPE=BC,SLOT=<number>,[KIND=<param>]
|,TYPE=EC,SLOT=<number>,[KIND=<param>];
|,TYPE=SWU,LCXNO=<number>,[KIND=<param>];
Example
Activate the LBC module without test
Input:
ACTIVATE-BSSM:A1,BC,38,ANT;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.