35.4.2
Advisories
H01:
PLEASE SPECIFY LTG NUMBER
(For SP 390 an LTG number must be specified.)
H02:
MODULE <pen> ACTIVATED
(Module activated and operational.)
H03:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (NEQ)
(Module is not operational, since it is ’not equipped’.)
H04:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (DEF)
(Module not operational, status = ’defective’.)
H05:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (NPR)
(Module not operational, state = ’not present’.)
H06:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACA)
(Module not operational, status = ’blocked due to interrelationship’.)
H07:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACH)
(Module not operational, status = ’hierarchically blocked’.)
H08:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACA-DEF)
(Module not operational, status = ’blocked due to interrelationship’ and ’defective’.)
H09:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACA-NPR)
(Module not operational, status = ’blocked due to interrelationship’ and ’not present’.)
H10:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACA-UNACH)
(Module not operational, status = ’blocked due to interrelationship’ and ’hierarchically blocked’.)
H11:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACH-DEF)
(Module not operational, status = ’hierarchically blocked’ and ’defective’.)
H12:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACH-NPR)
(Module not operational, status = ’hierarchically blocked’ and ’not present’.)
H13:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACA-UNACH-DEF)
(Module not operational, status = ’blocked due to interrelationship’,’hierarchically blocked’ and
’defective’.)
H14:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACA-UNACH-NPR)
(Module not operational, status = ’blocked due to interrelationship’, ’hierarchically blocked’ and ’not present’.)
H15:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (WBT)
(Module not operational, status = ’wrong board type’)
H16:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (WBT-UNACA)
(Module not operational, status = ’wrong board type’ and ’blocked due to interrelationship’.)
H17:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (WBT-UNACH)
(Module not operational, status = ’Wrong board type’ and ’hierarchically blocked’.)
H18:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (WBT-UNACA-UNACH)
(Module not operational, status = ’wrong board type’, blocked due to interrelationship’ and ’hierarchically blocked’.)
H19:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (DEF-LOADERROR: n)
(Module not operational, status = defective, load error has occurred. ’n’ denotes the type of error.)
H20:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACA-DEF-LOADERROR:n)
(In addition to error pattern H19 shown, the module is further ’blocked due to interrelationship’.)
H21:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UNACH-DEF-LOADERROR:n)
(In addition to error pattern H19 shown, the module is further ’hierarchically blocked’.)
H22:
MODULE <pen> ACTIVATED - NOT OPERATIONAL (UA/UH-DEF-LOADERROR:n)
(In addition to error pattern H19 shown, the module is further ’blocked due to interrelationship’ and ’hierarchically blocked’.)
H23:
MODULE <pen> DEACTIVATED
(Module has been manually blocked)
H24:
MODULE <pen> PRE-BLOCKED
(Module has been pre-blocked and is still operational.)
H25:
MODULE <lage> ACTIVATION WITH UNCONDITIONAL LOADING NOT POSSIBLE
BECAUSE MODULE STATUS WAS SOFT-LOCKED. ACTIVATION WITH CONDITIONAL LOADING INSTEAD.
H26:
THE DEACTIVATE JOB AFFECTS THE CURRENT REFERENCE CLOCK GENERATOR
PLEASE ANSWER PARAMETER REFOFF
Y . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
N . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
(If Y is specified, the dependability system switches to another reference clock generator.)
H27:
THE DEACTIVATE JOB AFFECTS THE LAST POSSIBLE REFERENCE CLOCK GENERATOR
********** THE SYSTEM CANNOT ADOPT A REFERENCE CLOCK **********
PLEASE ANSWER PARAMETER REFOFF
Y . . . DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
N . . . DO NOT DEACTIVATE CURRENT REFERENCE CLOCK GENERATOR
(If Y is answered, all reference clock generators are deactivated)
H28:
MODULE <pen> NOT DEACTIVATED (REFERENCE CLOCK GENERATOR)
(NO has been specified for REFOFF. As specified by the operator, the line module is not deactivated.)
H29:
MODULE <pen> PARAMETER CIR HAS BEEN IGNORED.
H30:
MODULE <pen> IS VOICE COMPRESSION PARTNER, THEREFORE THE VCM BOARDS WILL BE SWITCHED FIRST.
H31:
NO LOADING OF MODULE POSSIBLE, BECAUSE MODULE IS ONLY PRE-BLOCKED. FOR RESET OF MODULE USE
RESTART-BSSU:<pen>;
H32:
MODULE <pen> NO STATISTICAL DATA AVAILABLE.
H33:
NO MODULE FOUND TO BE SWITCHED.
H34:
MODULE <pen> WAS ALREADY ACTIVATED.
LOADING OF MODULE NOT INITIATED. LOADING CAN BE REACHED BY FOLLOWING COMMAND:
RESTART-BSSU:PEN;<pen>
H35:
MODULE <pen> ACTIVATION AND LOADING INITIATED.
H36:
MODULE <pen> ACTIVATION INITIATED.
LOADING OF MODULE NOT INITIATED. LOADING CAN BE REACHED BY FOLLOWING COMMAND:
RESTART-BSSU:PEN;<pen>
H37:
MODULE TYPE IS STMA2. THE EXISTING SUB_FEATURES @@@@@@@@@@@@@@@@@@@@@@@@@ WILL BE DISTURBED.
H38:
MODULE TYPE IS STMA2. THE EXISTING SUB_FEATURES @@@@@@@@@@@@@@@@@@@@@@@@@ WILL NOT BE DISTURBED.
H39:
PARAMETER(S) DISTYPE AND/OR RESET IGNORED FOR THE BOARD MOUNTED AT ^ltg^.^ltu^.^ebt^, BECAUSE THEY ARE ONLY VALID FOR THE TMDN BOARD.
H40:
PARAMETER CIR IGNORED . FOR TMDN BOARD :
DATA OF WHOLE BOARD WILL BE DISPLAYED: ^ltg^.^ltu^.^ebt^
H41:
STATISTIC COUNTERS AND TIMERS HAVE BEEN RESET.
H42:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.(SOFT LOCKED)
H43:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.(LOCKED)
H44:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.(BUSY)
H45:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.(GENNR)
H46:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.(TRS)
H47:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.(DEFIL)
H48:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.(SIGNED_OFF)
H49:
MODULE ^ltg^.^ltu^.^ebt^ ACTIVATED - NOT OPERATIONAL.
(EXTERNAL LOADING FOR THE BOARD MAY TAKE SOME SECONDS)
H50
IP TERMINALS WERE MOVED SUCCESSFULLY FROM THE BOARD ^ltg^-^ltu^-^ebt^ (RECONFIGURATION POOL ^poolno^) TO THE BOARD ^ltg^-^ltu^-^ebt^ (RECONFIGURATION POOL ^poolno^)
H51
THE BOARD ^ltg^-^ltu^-^ebt^ IS ACTIVATED IN STANDBY ^stdmode^ MODE. (EXTERNAL LOADING FOR THE BOARD MAY TAKE SOME SECONDS)
H52
PARAMETER HFASW IGNORED FOR THE BOARD MOUNTED AT ^ltg^.^ltu^.^ebt^, BECAUSE IT IS ONLY VALID FOR THE STMIHFA2 BOARD.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.