36.3.2 DEACTIVATE-BST

This function causes the deactivation of the BST. First BST finishes its running process, then it will get inactive. Time delays between the end of the AMO and the real end of the BST can occur, because of this running process from BST.

Procedure Overview


Command Code	Parameter
DEACTIVATE-BST	;

Examples

Deactivation of the BST.

Input:

DEACTIVATE-BST;

Output:

H02: SWITCH OFF OF BST INITIATED.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.