36.4
Parameter Description
DEST
Output media of the system messages as logical device
Type of input
:
Single value, optional
Possible values
:
CON1 - CON6 = Outputterminal 1 - 6
LP1 - LP4 = Lineprinter 1 - 4
Default value
:
Logical device, the AMO has been started from
MARK
Mark system messages with start/stop signs
Type of input
:
Single value, optional
Possible values
:
Y = Insert message start/stop signs
N = Do not insert message start/stop signs
Default value
:
Y
SOURCE
Source of the system messages as symbolical device
Type of input
:
Single value, mandatory
Possible values
:
DPT1 = Dependability Terminal 1
DPT2 = Dependability Terminal 2
DPT3 = Dependability Terminal 3
DPT4 = Dependability Terminal 4
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.