37.2.4
DISPLAY-BUEND
This action displays information about one or more existing trunk groups.
Procedure Overview
Command Code
Parameter
DISPLAY-BUEND
[TGRP=<number>],[FORMAT=<param>];
If no number or range of numbers is entered for TGRP, all existing trunk groups will be displayed.
For each trunk group, the trunk group number, trunk group name, maximum number of allocated trunks,device type, subgroup index, the number of trunks to be traced without blocking the trunk group, the number of trunks that can handle ACD calls and the allocated port locations will be displayed.
If identical ports appear in the display for a trunk group, i.e. the same trunk appears more than once, then a corresponding number of devices is connected to the trunk.
By means of FORMAT parameter (B) , the B-channel status of a trunk group can be interrogated.
Examples
Input:
DISPLAY-BUEND:42,B;
Output:
NO. MAX ACT BUSY FREE OTHER
42 20 0 0 0 0
Interrogate trunk group 47.
Input:
DISPLAY-BUEND:47,L;
Output:
+------------------------------------------------------------------------------+
| TRUNK GROUP NO.: 47 TRUNK GROUP NAME: ISDN CO MAX.NO.: 60 |
| SUBGROUP NO.: 52 DEVICE TYPE: S2COD TRACENO: 0 |
| SEARCH MODE : CIRCULAR ACD THRESHOLD : * |
| ASSIGNED TO AT LEAST ONE ROUTE PRIORITY: 1 |
| TDDRFLAG : ON TDDRTHRESHOLD: SOURCEGROUPIDX : 1 |
| GDTRRULE : 140 ACDPMGRP : 20 |
| THE FOLLOWING TRUNKS (LTG-LTU-SLOT-CCT) HAVE BEEN ALLOCATED: |
+------------------------------------------------------------------------------+
| 1- 1-115- 0 B-CHL: 1 | 1- 1-115- 0 B-CHL: 2 | 1- 1-115- 0 B-CHL: 3 |
| 1- 1-115- 0 B-CHL: 4 | 1- 1-115- 0 B-CHL: 5 | 1- 1-115- 0 B-CHL: 6 |
| 1- 1-115- 0 B-CHL: 7 | 1- 1-115- 0 B-CHL: 8 | 1- 1-115- 0 B-CHL: 9 |
| 1- 1-115- 0 B-CHL: 10 | 1- 1-115- 0 B-CHL: 11 | 1- 1-115- 0 B-CHL: 12 |
| 1- 1-115- 0 B-CHL: 13 | 1- 1-115- 0 B-CHL: 14 | 1- 1-115- 0 B-CHL: 15 |
| 1- 1-115- 0 B-CHL: 16 | 1- 1-115- 0 B-CHL: 17 | 1- 1-115- 0 B-CHL: 18 |
| 1- 1-115- 0 B-CHL: 19 | 1- 1-115- 0 B-CHL: 20 | 1- 1-115- 0 B-CHL: 21 |
| 1- 1-115- 0 B-CHL: 22 | 1- 1-115- 0 B-CHL: 23 | 1- 1-115- 0 B-CHL: 24 |
| 1- 1-115- 0 B-CHL: 25 | 1- 1-115- 0 B-CHL: 26 | 1- 1-115- 0 B-CHL: 27 |
| 1- 1-115- 0 B-CHL: 28 | 1- 1-115- 0 B-CHL: 29 | 1- 1-115- 0 B-CHL: 30 |
+------------------------------------------------------------------------------+
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.