45.1 Configuration

Calls to a Domain will be routed to a specific trunk based on the configuration via AMO CLIMA.
With AMO CLIMA, a mapping table can be configured with a DOMAIN-NUMBER, where NUMBER represents a preconfigured trunk access code.
AMO LDPLN
•
For the new DOMAIN table, a DOMAIN NUMBERING PLAN has to be configured.
•
The 790 numbering plan in the LCR pool 8 will be reserved for the DOMAIN table.
ADD-LDPLN:LCRADM,790,8,20,"DOMAIN PATTERN PLAN";
NOTE:  The 790 numbering plan in the LCR pool 8 is reserved for the DOMAIN table, therefore it must not be included by UPLOL in LDPLNS and LDPLN objects.
AMO CLIMA
•
A new TABLE named DOMAIN has been added for domain mapping.
•
The domain is mapped to a number which is a preconfigured trunk access code.
•
The calls to a specific domain will be routed to the configured trunk according to the DOMAIN-NUMBER pair configured with AMO CLIMA.
ADD-CLIMA:DOMAIN,ATOS.NET,101;
// the Domain ATOS.NET will be routed to preconfigured trunk access code 101
<ADD-CLIMA
TABLE = ?
TABLE : TABLE TYPE
CHARACTERISTIC : REQUIRED CONDITIONAL
POSS. VALUES : DDI DDI TABLE
CLI CLI TABLE
DOMAIN DOMAIN TABLE
 
TABLE = DOMAIN
 
DOMAIN = ?
DOMAIN : DOMAIN; ALLOWED: 0..9,A-Z,A-Z,_,.,
CHARACTERISTIC : REQUIRED
POSSIBLE VALUES : MAX. OF 63 POSITIONS
 
DOMAIN = ATOS.NET
 
NUMBER = ?
NUMBER : TRUNK ACCESS CODE
CHARACTERISTIC : REQUIRED
POSSIBLE VALUES : MAX. OF 22 POSITIONS
NUMBER = 101;
ADD-CLIMA:DOMAIN,ATOS.NET,101;
H500: AMO CLIMA STARTED
H04: DOMAIN HAS BEEN ADDED FOR DOMAINNO 6.
 
AMO-CLIMA-111 CLI MANIPULATION
ADD COMPLETED;
 
 
DIS-CLIMA:DOMAIN;
H500: AMO CLIMA STARTED
----------------------------------------------------------------
DOMAIN TABLE
----------------------------------------------------------------
DOMAINNO : 1
DOMAIN : ABA.COM
NUMBER : 100
----------------------------------------------------------------
DOMAINNO : 6
DOMAIN : ATOS.NET
NUMBER : 101
---------------------------------------------------------------
DOMAINNO : 7
DOMAIN : SIEMENS.COM
NUMBER : 102
---------------------------------------------------------------
AMO-CLIMA-111 CLI MANIPULATION
DISPLAY COMPLETED
 
NOTE:  For more information regarding the configuration of SIP URI, please see OpenScape Solution Set V10, OpenScape SIP URI Configuration Guide, Administrator Documentation.
 
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.