50.4 Error Messages and Advisories

50.4.1 Error Messages


F01:	STATION NUMBER <xxxx> NOT PRESENT
F02	THE SYSTEM MEMORY HAS BEEN EXCEEDED
F03:	MAXIMUM NUMBER OF COM GROUPS REACHED, NUMBER HAS TO BE INCREASED BY MEANS OF ADD-DIMSU:COMGR=<xxx>;
F04:	STION NUMBER <stno> ALREDY A MEMBER OF COM GROUP <grno>
F05:	STATION NUMBER <stno> IS EITHER NOT A OPTISET NOR A OPTIP500 NOR A SET600
F06:	MEMBER NUMBER <stno> IS INVALID FOR A SMALL COM GROUP
F07:	NUMBER OF STATION NUMBERS AND NUMBER OF MEMBER NUMBERS DO NOT MATCH
F08:	COM GROUP <grno> DOES NOT EXIST
F11:	INCORRECT VALUES FOR DELETE WERE ENTERED
F12:	COM GROUP NUMBER TOO LARGE - REFER TO COMGR ALLOC IN AMO DIMEN
F13:	<xxxx> THE SPECIFIED CLASS OF SERVICE NUMBER IS LARGER THAN THE
F14:	GROUP SIZE CANNOT BE CHANGED FROM LARGE TO SMALL IN AN ADD OPERATION
F15:	STNO NUMBER <stno> IS NOT A MEMBER OF COM GROUP <grno>
F16:	THE RANGE <stn1> && <stn2> IS NOT IN THE COM GROUP <grno>
F17:	STATION NUMBER <stno> IS NOT A MEMBER OF ANY COM GROUP
F18:	THE RANGE <stn1> && <stn2> IS NOT IN ANY COM GROUP
F19:	THE LOWER AND UPPER LIMITS OF A STNO RANGE SHOULD HAVE SAME NUMBER OF DIGITS
F20:	CCIDXS OR CCIDXD HAS REACHED ITS CRITICAL LIMIT NUMBER HAS TO BE INCREASED BY MEANS OF ADD-DIMSU:CCIDXS=<xxx>; OR ADD-DIMSU:CCIDXD=<xxx>;
F21:	MAXIMUM NUMBER OF INFO FIELDS ARE USED, NUMBER HAS TO BE INCREASED BY MEANS OF ADD-DIMSU:INFO=<xxx>;
F22:	INDEX IS OUT OF RANGE
F23:	ENTERED STNO RANGE IS TOO LARGE .

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.