54.3.1 START-COPY


Command Code	Parameter
START-COPY	SRCFILE=<string>,DESTFILE=<string>,[UNIT=<param>]
	,[DESTTYPE=<param>],[RECLEN=<number>]
	,[BLOCKLEN=<number>],[SRCADR=<number>]
	,[DESTADR=<number>],[LEN=<number>],[BUF=<number>]
	,[SRCVOL=<string>],[DESTVOL=<string>],[SEL=<param>]
	,[WARN=<param>],[ANS=<param>],[DIALOG=<param>];

Example

Copy files on a magnetic tape.The magnetic tape must be reserved with ACT-RTAPE.

Input:

START-COPY:":DBD:L31615/S0123X00100/RE/ADS",":M:RE.ADS";

Output:

COPY READY
<:DBD:L31516/S0123X00100/RE/ADS> COPIED TO
<:M:RE.ADS>

COPY FINISHED
STATUS = H’0000

Note:

If an error occurs after entering a START-COPY command, the device must be switched off with command DEACT-DSSM. The copy action will be executed after entering ACT-DSSM.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.