54.4
Parameter Description
ANS
Answer/response
Answer requested, when parameter SEL=Y.
Type of Input
:
Single value
optional
Possible Values
:
Y = copy file
N = do not copy file
I = interrupt the action
C = copy all additionally specified files
Default Value
:
none
BLOCKLEN
Size of blocks at destination device
Type of Input
:
Single value
optional
Possible Values
:
128 - 65535
Default Value
:
4096
BUF
Buffer size
Size of the copy buffer in bytes.
Type of Input
:
Single value
optional
Possible Values
:
256 - 12000
Default Value
:
4096
DESTADR
Destination address
Byte position at which writing is to start.
Type of Input
:
Single value
optional
Possible Values
:
address with a maximum of 9 positions
Default Value
:
0
DESTFILE
Destination file
Type of Input
:
Single value
mandatory
Possible Values
:
:PDS:tname2
fully or partially qualified hard disk file name
:C:tname2
fully or partially qualified cartridge file name
max. length 32
DESTTYPE
Type of destination file
Type of Input
:
Single value
optional
Possible Values
:
BYTE = Byte
SAMF = SAM file with fixed record length
SAMV = SAM file with variable record length
Default Value
:
same as source file
DESTVOL
Destination volume name (only if FD )
Type of Input
:
Single value
optional
Possible Values
:
volume name with a maximum of 6 positions
Default Value
:
’ ’
DIALOG
Dialog mode
Text to be output on the terminal by programs if the AMO is called?
Type of Input
:
Single value
optional
Possible Value
:
Y = yes
Default Value
:
Y
LEN
Number of bytes to be copied, length of a file
Type of Input
:
Single value
optional
Possible Values
:
max. 9 positions (numeric)
Default Value
:
Entire file
RECLEN
Record length of SAM-files
Length of records in the destination file, if source file is from type byte
Type of Input
:
Single value
optional
Possible Values
:
1 - 1020
Default Value
:
128
SEL
Configuration of partially qualified names via ans./response
Selection mode. Specifies whether entries are to be requested for each file with the prompt parameter ANS or whether the files are to be copied directly.
Type of Input
:
Single value
optional
Possible Values
:
Y = yes, inquiry by parameter ANS
N = no, no inquiry
Default Value
:
Y
SRCADR
Source address.
Byte position at which reading is to start.
Type of Input
:
Single value
optional
Possible Values
:
address with a maximum of 9 positions
Default Value
:
0
SRCFILE
Source file, sending file
Type of Input
:
Single value
mandatory
Possible Values
:
:PDS:tname
fully or partially qualified hard disk file name
:C:tname
fully or partially qualified cartridge file name
max. length 32
SRCVOL
Source volume name (only if FD)
Type of Input
:
Single value
optional
Possible Values
:
volume name with a maximum of 6 positions
Default Value
:
’ ’
UNIT
Functional system unit code i.e. swu or server
Module into which the AMO is to be loaded.
Type of Input
:
Single value
optional
Possible Values
:
A1
= Administration and Data Server (ADS)
Default Value
:
A1
WARN
Warning
Inquiry, when overwriting files
Type of Input
:
Single value
optional
Possible Values
:
Y = overwrite file
N = do not overwrite file
Default Value
:
Y
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.