58.3.4
DISPLAY-CPTP
Depending on the values for the branch parameter TYPE, the following parameters can be interrogated:
1.
one (all) DP-Connection(s)
2.
one (all) Application(s)
3.
all DP-connections and all applications
Procedure Overview
Command Code
Parameter
DISPLAY-CPTP
[TYPE=<param>],[NO=<number>];
Examples
1.
Display all communication parameters.
Input:
DISPLAY-CPTP;
Output:
DP-CONNECTION :
+-------+----------+-----------------+
| DP NO | DPPROC | IP NUMBER |
+-------+----------+-----------------+
| __1 | DPPROC1_ | 180.1.5.99_____ |
+-------+----------+-----------------+
APPLICATION :
+-----+----------+----------+----------+-----+----+-----+---------+----------+
|APPL | EMSAPPL | DPPROC | DPAPPL |MSG |LOC |FAR | LOCAL | FAR |
| NO | | | |BASED|PORT|PORT | TSAP | TSAP |
+-----+----------+----------+----------+-----+----+-----+---------+----------+
| __1 | EMSAPPL1 | DPPROC1_ | DPAPPL1_ | YES |102 |102__|IDAPPL1__|IDAPPLFAR_|
+-----+----------+----------+----------+-----+----+-----+---------+----------+
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.