58.4
Parameter Description
DPAPPL
Name of the farend application; name need only be known to the local application and CMS, not to the far end application.
Type of Input
:
Single value, mandatory
Possible Values
:
1 - 8 chars; 1st char /= ’ ’
DPPROC
Name of the farend host; name need only be known to the local application and CMS, not to the far end application.
Type of Input
:
Single value, mandatory
Possible Values
:
1 - 8 chars; 1st char /= ’ ’
EMSAPPL
Name of the local application; name need only be known to the local application and CMS, not to the far end application.
Type of Input
:
Single value, mandatory
Possible Values
:
1 - 8 chars; 1st char /= ’ ’
FARPORT
A well known server port number to which an application can connect via CMS. This port number must be identical with that in the far end host.
Type of Input
:
Single value, mandatory
Possible Values
:
1 - 65535
(except 102 for stream based)
FARTSAP
Identification of the far end application according ISO-8073.
Type of Input
:
Single value, mandatory
Possible Values
:
1 - 10 chars; 1st char /= ’ ’
IPNO
THE IP address of the far end application. This address must also be set on the far end host.
Type of Input
:
Single value, mandatory
Possible Values
:
7 - 15 chars; (0-255.0-255.0-255.0-255)
LOCPORT
A well known port number to which a far end application can connect. It is up to the client to know what application is associated with this well known CMS port.
Type of Input
:
Single value, mandatory
Possible Values
:
712 - 811 (stream based)
:
102 (message based)
LOCTSAP
Identification of the own application according ISO-8073. The host has to know this identification.
Type of Input
:
Single value, mandatory
Possible Values
:
1 - 10 chars; 1st char /= ’ ’
MSGBASED
Specific type of data transmission to application.
Type of Input
:
Single value, mandatory
Possible Values
:
YES:
application gets the data message based (protocol ISO-8073 is used)
NO:
application gets the data stream based
NO
Using ADD-CPTP NO is a free number in the table of DPCON or APPL (according TYPE). If NO is not entered, then the AMO looks for a free place in the table. If there is no free place, then an error message will be displayed.
Type of Input
:
Single value,
optional
mandatory (DELETE)
Possible Values
:
1 - 255
two chained values are allowed with DELETE
TYPE
Type of Configuration
Type of Input
:
Single value,
optional
mandatory (ADD)
Possible Values
:
DPCON = DP Connection
APPL = Application
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.