61.2.2 CHANGE-DAGR

Change the file parameters. For the CDRC-files there can are only the file sizes be changed.

For the FT-file the parameters for the file size, the copy time, the copy period, the output code and the customer soecific file name can be changed. The AMO checks if the output code is changed (from ASCII to EBCDIC or reverse). In this case, the AMO outputs an advisory message. A manually copy of the file must be performed that the file can be transferred. Is the file not yet picked up, then the same actions must be performed as at the action ADD.

The copy time will be checked in the same way as at the action add.

The parameters in the branch for the FT-file are a group of parameters where at least on e parameter has to be enterred.

Procedure Overview


Command Code	Parameter
CHANGE-DAGR	\|FILE=CDRC1,NO=<number>;	(1)

	\|FILE=CDRC2,NO=<number>;	(2)

	\|FILE=FT,{(min 1)NO=<number>,CODE=<name>,TIME=<number>,	(3)
	PERIOD=<number>,NAME=<string>};

Examples

Change FILE CDRC1 to 30000 data records

Input:

CHANGE-DAGR:CDRC1,9000;

Change the file size for the FT-file to 30000 data records and the copy period to 36 hours.

Input:

CHANGE-DAGR:FT,30000,,,36;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.