63.5.2 Advisories


H01:	NO VALID TIME SET IN SYSTEM. INITIATE SOFT RESTART.
H02:	NO VALID ENTRY FOR DATE / TIME IN SYSTEM
H03:	EXCEPTION ^ec^ WHEN CHANGING TIME / DATE: POSSIBLE REASON: BATTERY BUFFERING OF THE HW-CLOCK.
H04:	COMBINATION OF GMTDIR AND TIMEOFFS ZERO DOESN’T MAKE SENSE - ADJUST ALSO PARAMETER TIMEOFFS.
H05:	If parameter MODE is not specified properly, the switching time and device display are wrong !! In any case the feature Different Time Zones does not work properly.
H06:	The relative time difference to GMT was re-calculated because of changed parameters TIMEOFFS and/or MODE and/or DSTOFFS.
H07:	The change of parameters GMTRTG, TIMEOFFS and/or MODE needs an initialization of SONUS in case of automatical DST switching (EU standard) Call SWITCHOVER-SONUS:AUTO; unconditional.
H08:	COMMAND IS ONLY ALLOWED IN TEST LABS.
H09:	IF MODE IS SET TO NT, DSTOFFS WILL BE RESET TO 0.

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.