65.2.3
REGENERATE-DBC
Regenerate the database configuration data on the hard disk.
Procedure Overview
Command Code
Parameter
REGENERATE-DBC
;
Example
Regenerate the database configuration file:
Input:
REGENERATE-DBC;
Output:
REGENERATE-DBC;
H500: AMO DBC STARTED
EXEC-DBC:"350E ",35;
CHANGE-DBC:SYSTEM=HICOM ;
AMO-DBC -109 DATABASE CONFIGURATION
REGENERATE COMPLETED;
Note
If the CONFIGURATION DATA cannot be loaded, the AMO is terminated and error message F04 issued.
If the hardware architecture table cannot be loaded, the AMO is terminated and error message F12 issued.
A ADD-DBC command can not be regenerated. This command is regenerated as a EXEC-DBC command and if necessary a CHANGE-DBC command.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.