65.4.2
Advisories
H01:
IN ORDER TO LOAD THE CHANGES IN THE CONFIGURATION TABLE, INITIATE
RELOAD AND GENERATE THE SWU-DATABASE.
H02:
AT THIS TIME VALID LAYOUT-NAMES ARE:
<dimen> ... <text>
Note: These values are taken from the DBC dimensioning table on hard disk.
H03:
ARE YOU SURE ?
H04:
EXEC-
APC
TASK MUST BE CARRIED OUT.
H05:
VALUE OF PARAMETER <param> IS SET TO ZERO, TOO.
H06:
IN ORDER TO LOAD THE CHANGES IN THE CONFIGURATION TABLE, INITIATE A RELOAD.
H07:
PARAMETER MONO (AMO-
CPCI
) IS SET TO ^mono^ TO AVOID INCONSISTENCY WITH AMO-DBC (PLEASE SEE 'Note on Parameter MONO' IN AMO DESCRIPTION OF AMO-
CPCI
FOR FURTHER INFORMATION).
H08:
FOR DASIST FUNCTIONALITY TO WORK A SWU RESTART IS NOW REQUIRED FOR EACH SWU PROCESSOR.
H09:
DB CONFIGURATION DATA HAVE ALREADY BEEN GENERATED WITH THOSE PARAMETERS.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.