67.3.1 ADD-DCSM

This call is used to configure a physical storage/nonstorage medium or an external device on a given controller. The storage medium can be a Hard Disk, a Flash-Memory or an external device.

Because a Flash-Memory can be configured only on controller 8 of the database, an attempt to configure Flash-Memory not on controller 8, or to configure any other device on controller 8, will be rejected with an error message.

External devices are devices that are connected to the SCSI-Bus and are not used by RMX.

Procedure Overview


Command Code	Parameter
ADD-DCSM	[UNIT=<param>],CNO=<number>
	\|,DEVTYPE=HD,PNO=<text>;
	\|,DEVTYPE=FM,PNO=<text>;
	\|,DEVTYPE=EXT,[INFO=<text>];

Examples

Configure a hard disk

Input:

ADD-DCSM:A1,2,HD,2GIGA;

Configure a flash memory

Input:

ADD-DCSM:A1,8,FM,FM128;

Configure an external device

Input:

ADD-DCSM:A1,4,EXT,BACKUP;

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.