67.3.2
DELETE-DCSM
Cancelling a device from the system configuration.
NOTE:
The device areas must first be cancelled explicitly.
The device to be cancelled must be deactivated.
Procedure Overview
Command Code
Parameter
DELETE-DCSM
[UNIT=<param>],CNO=<number>;
Examples
1.
The device on controller 2 of the ADS is cancelled.
Input:
DELETE-DCSM:,2;
2.
The device on controller 4 (external device) of the ADS is canceled
Input:
DELETE-DCSM:A1,4;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.