67.5 Error Messages and Advisories

67.5.1 Error Messages


F02:	PART NUMBER <pno> OF DEVICE NOT ALLOWED ACCORDING TO DEVICE-TYPE-LIST
F03:	CONTROLLER <cno> IS NOT YET ASSIGNED
F05:	DEVICE HAS ALREADY BEEN SET UP
F06:	AMO CANNOT BE EXECUTED
F07:	THERE IS NO DEVICE ASSIGNED TO CONTROLLER <cno>
F08:	DEVICE <devno> OF CONTROLLER <cno> CANNOT BE DELETED AT THE MOMENT;
	DEVICE STATUS: <status>
F09:	THERE ARE STILL AREAS SET UP ON DEVICE <devno> OF CONTROLLER <cno>
F10:	DEVICE GRANULARITY MUST NOT BE CANGED
F11:	INSTALLED AREAS EXCEED MAXIMUM CAPACITY OF NEW DEVICE
F12:	THE DEVICE TYPE MUST NOT BE CHANGED
F14:	CNO=8 IS VALID ONLY FOR DEVTYPE=FM
F15:	DEVTYPE=FM CAN BE CONFIGURED ONLY ON CNO=8

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.